FL Roofing LicenseLicenseCCC1331782 Hablamos Español
  1. Home
  2. Blog
  3. Tile Roof Underlayment: How Long Does It Last?
Roof Tips Blog · Roof Types

Tile Roof Underlayment: How Long Does It Last?

The underlayment is the waterproof layer under your roof tile, and it wears out long before the tile does. What it is, how long it lasts in South Florida, the signs it's failing and what replacing it involves.

  • Hablamos Español
  • Licensed & insured · CCC1331782
  • Mon–Fri 8–5 · Sat 9–2

100% free · No obligation

Schedule Your FREE Roof Estimate / Inspection

Full re-roof quote, a repair, or just an inspection. Pick one and we'll call to set a time.

We'll call you back in English or Spanish during business hours: Mon–Fri 8 AM–5 PM, Sat 9 AM–2 PM.

Google 4.9 65 reviews
BBB A+ Accredited Business
GAF Certified Commercial Contractor

The short answer

Underlayment is the waterproof sheet between your roof tile and the wood deck. In South Florida it usually lasts about 20 to 30 years, and when it wears out the roof leaks even though the tile looks fine. Replacing it means taking the tile off, so on our re-roofs new underlayment and new tile go on together.

What is tile roof underlayment, and does a tile roof need it?

Yes, it needs it. A tile roof is two layers doing two jobs.

The tile is on top. It sheds most of the rain and shields what's below from sun, wind and falling branches. But tile isn't sealed. Each tile overlaps the next, and wind-driven rain blows up under those overlaps. Water also gets in through cracked tiles and along the valleys and walls.

The underlayment is underneath. It's a waterproof sheet fastened or stuck to the wood deck. It catches the water that gets past the tile and carries it down to the roof's edge. On most South Florida roofs the tile is attached to it as well, with foam adhesive or with screws that pass through it.

So when people ask whether a concrete tile roof is waterproof, the answer is that the underlayment is.

What types of tile underlayment are there?

Two kinds cover almost every tile roof in South Florida.

Hot-moppedPeel-and-stick
Also called30/90, or hot mopSelf-adhered
What it isA base sheet of roofing felt nailed to the deck, with a heavier, granule-surfaced sheet set over it in hot asphaltA rubberized asphalt sheet with a sticky back that bonds to the deck or to a base sheet
How it sealsThe asphalt between the two sheetsThe sheet sticks to what's under it and grips around nails and screws
Where you find itMany older tile roofs here. Still in useMany tile re-roofs today, including ours

Peel-and-stick is now common on re-roofs because it bonds to the deck. If wind ever takes tiles, a sealed deck is the layer left protecting the house.

The label covers a wide range of products, though. They differ in thickness, in how much heat they're made for and in how long they can sit in the sun before the tile goes on. So ask for the brand and the product, not only the type. Under tile, we install TRI-BUILT or Polyglass peel-and-stick underlayment.

How long does tile roof underlayment last in Florida?

About 20 to 30 years, in our experience. The tile over it can go on much longer, which is why tile roofs here are replaced when the underlayment wears out, not when the tile does.

These things decide where in that range a roof falls.

  • The product. A thicker sheet made for high heat usually lasts longer. That's decided on the day of the re-roof and can't be upgraded later.
  • Heat. The space under roof tile gets very hot, and decades of that heat dry the asphalt in the sheet until it cracks.
  • Broken and slipped tiles. Underlayment is meant to stay covered. Where a tile is cracked or missing, that spot takes sun and rain directly and wears out fast.
  • Debris. Leaves and broken tile pieces pile up in valleys and behind chimneys. They hold water against the sheet for days and push it sideways under the tile.
  • Foot traffic. Every tile cracked by a footstep exposes the underlayment below it.
  • Pressure washing. High pressure cracks tile and can drive water up under it.
  • The metal at the edges. At the eaves, valleys and walls, the underlayment laps onto metal flashing. When that metal rusts, the leak starts there even if the sheet is fine.

What are the signs that the underlayment is failing?

You can't see the underlayment from outside, so the signs are indirect.

  • A leak with no broken or missing tile above it.
  • Leaks in different rooms, a year or two apart.
  • Leaks that show up in long, wind-driven rain and not in a quick shower.
  • A repair that stopped one leak, followed by a new one a few feet away.
  • Stains, peeling paint or soft wood along the roof's edge, where water running under the tile comes out.
  • Dark stains on the underside of the wood in the attic.

A roofer confirms it by lifting a few tiles. Sound underlayment is flexible and still has its surface. Worn-out underlayment is dry and brittle, cracked along the seams, and breaks apart when it's handled.

Stay off the roof. Tile cracks underfoot, and a wet roof is slippery.

Can I replace the underlayment and keep my tile?

People ask this more than anything else about tile roofs, because the tile often still looks good. Some roofers offer it and call it a lift and reset. On our re-roofs we always install new tile, for four reasons.

  • Concrete tile breaks coming off, especially tile that was set in foam or mortar and is glued to the old roof.
  • Taking it off slowly enough to save it, then stacking it and working around it, adds a lot of labor.
  • The broken tiles need replacements. After 25 years the color has faded and the shape may no longer be made, so the new ones show.
  • Old tile can't always be attached the way today's code requires.

A small repair is another matter. For a leak in one area, a roofer can lift the tiles there, patch the underlayment and set the same tiles back. That works when the underlayment around the patch is still sound.

One Florida rule applies to bigger repairs. On older roofs, if more than 25% of a roof section is repaired within 12 months, the whole section has to be brought up to today's code. Roofs put on with a permit since March 2009 are exempt, so only the repaired part has to meet today's code.

What does replacing tile underlayment involve?

It's a full re-roof, done in this order.

  1. Permit. We pull it from your city or county.
  2. Tear-off. The tile and the old underlayment come off, down to the wood deck.
  3. Wood and nailing. Rotten decking is replaced, and the deck is re-nailed to today's code.
  4. New underlayment and flashing. The peel-and-stick sheet goes on, with new metal at the edges, valleys and walls. Roofers call this stage the dry-in, because the house is watertight again.
  5. Inspection. The building department inspects the underlayment before any tile covers it.
  6. Tile. The new tile is delivered, set and attached. The hip and ridge tiles are fastened to a wood or metal support.
  7. Final inspection and clean-up.

Steps 2 to 4 usually take 1 to 2 days, and setting the tile takes 2 to 3 more. There's often a wait between them, while the inspection is done and the tile arrives. That's normal. The underlayment is the waterproof layer.

What should I ask a roofer about the underlayment?

  1. What brand and product is it, and is it peel-and-stick?
  2. Is the metal flashing being replaced too, at the edges, valleys and walls?
  3. How will the tile be attached?
  4. Is the price for new tile?
  5. How is rotten wood priced if you find some?
  6. How long will the roof sit between the dry-in and the tile?

This is how we answer them.

  1. TRI-BUILT or Polyglass peel-and-stick underlayment.
  2. Yes. Every re-roof gets new flashing.
  3. With roof tile adhesive or screws, following the tile's Florida Product Approval.
  4. Yes. It's always new tile, and for concrete tile that's usually Westlake Royal.
  5. Your quote spells out how rotten wood is priced before we start.
  6. You get an expected timeline with your quote.

There's more on our Concrete Tile Roofs page.

How Bravo's Roofing can help

If your tile roof leaks and you can't see why, we'll find out whether the problem is in one spot or across the underlayment. We inspect the roof and give you a written estimate with photos of what we found, for the repair or for the re-roof. Our workmanship warranty on tile roofs is 10 years, and estimates and inspections are free. Hablamos español.

Lifespans are what we see on South Florida roofs, not a guarantee for any one roof. Information is current as of November 2026.