
- Home
- Roof Types
- TPO Roofing
TPO Roofing in Palm Beach & Broward County
TPO is a white single-ply membrane with heat-welded seams. It's a common choice for commercial flat roofs and works on flat sections of homes too.
100% free · No obligation
Schedule Your FREE Roof Estimate / Inspection
Full re-roof quote, a repair, or just an inspection. Pick one and we'll call to set a time.
Request Received
Thanks! We'll call you shortly to set up your free estimate. Need us sooner? Call (561) 335-3869.
Single-Ply Membrane
TPO stands for thermoplastic polyolefin, a tough, flexible roofing sheet.

One sheet does the work. A TPO sheet is three layers made as one: a base, a reinforcing fabric in the middle that keeps it from tearing, and a top layer built to take sun and heat.
Seams are melted together. The sheets come in wide rolls and overlap by a few inches. A hot-air welder melts the two sheets into each other, so a good seam becomes part of the sheet instead of a glued joint.
How it's held down. TPO goes over insulation board. It's either screwed down along the seams with metal plates or glued to the board. Which method, and how many screws, comes from the system's Florida Product Approval and the wind pressure your building has to resist.
Thickness. TPO is sold by thickness in mils, or thousandths of an inch. 45, 60 and 80 are the common sizes. A thicker sheet has more material above the fabric to wear away and stands up to punctures better. 45 mil is the budget sheet. We install 60 mil. For a roof that should last, or one that gets foot traffic, the National Roofing Contractors Association points to 60 mil or thicker. Whoever you hire, ask what thickness is on the quote.
White on purpose. The white surface reflects much of the sun's heat, which helps keep the roof and the building under it cooler.
Warranty. Our 7-year workmanship warranty on flat roofs, plus the manufacturer's material warranty.
- Heat-welded seams
- White, reflective surface
- Over new insulation board
- Tapered insulation fixes ponding
Is TPO Right for Your Roof?
Big, Open Roofs
Wide sheets cover plazas, warehouses, offices and condo buildings with few seams, and fewer seams means fewer places to leak.
Cooler Roof
The white surface reflects heat instead of soaking it up. On a large building, that's a lot of roof not heating the space below.
Welded Seams
A welded seam is the strongest part of a TPO roof when it's done right. A weld that looks closed but didn't fuse is the classic TPO leak, so ask how the seams are checked after welding.
Drains, Curbs & Edges
TPO rarely leaks in the middle of a sheet. It leaks at the details: drains, AC curbs, pipes and the metal edge. Wind also pulls hardest at the corners and edges of a flat roof, so that's where the fastening is closest together.
Punctures & Grease
A dropped tool or a loose screw underfoot can puncture a single sheet, so busy paths need walk pads. Cooking grease breaks TPO down. Tell us if a kitchen exhaust fan vents onto your roof.
Small, Cut-Up Roofs
A porch with lots of corners, posts and pipes means lots of hand-welded details. On small roofs like that, modified bitumen is often the simpler choice.
TPO vs. Other Flat Roofs
| System | What it is | Seams | Good fit for |
|---|---|---|---|
| TPO | White single-ply membrane over insulation board | Heat-welded | Commercial flat roofs and large low-slope roofs |
| Modified bitumen | Asphalt-based sheets in two or more layers | Laps sealed in hot asphalt | Homes, porches and roofs with foot traffic |
| Silicone coating | Liquid coating over an existing roof that is still sound | None, one continuous layer | Extending the life of a dry, sound flat roof |
Not sure which fits? Flat roofs · Roof coatings
How a TPO Roof Goes On
- 01
Inspection
We check the deck, drains and edges, and whether the old roof is dry enough to stay or has to come off.
- 02
Tear-off or recover
We remove the old roof, or cover it where Florida code allows: one existing layer, dry and sound.
- 03
Insulation
New insulation board, tapered where water needs more slope.
- 04
Membrane
TPO sheets fastened or glued down, with more fastening at the corners and edges. Every seam is hot-air welded.
- 05
Flashing & final
Drains, curbs, pipes and walls are flashed, the edge metal goes on, then the final inspection.
What Our Customers Say
“Bravo Roofing has consistently exceeded expectations with quality materials and exceptional workmanship for both my residential and commercial clients.”
“Great roofing company. They are reasonably priced. They are well equipped and very thorough. I recommend this company. They did an excellent job overhauling my flat roof.”
“Great pricing, quick service, and responsive staff. I've used them for several projects and will continue to do so.”
TPO Questions
How long does a TPO roof last in Florida?
About 15 to 25 years is typical for flat roofs here. With TPO, the thickness of the sheet, how well the roof drains and how much foot traffic it sees make the difference.
Is TPO a good roof for a house?
It can be, on flat sections like porches and additions and on flat-roof homes. Keep in mind that it's bright white and looks commercial, which matters if you can see the roof from a window or the street. On small roofs with lots of corners, many homes use modified bitumen instead. We'll explain which fits your roof.
TPO or modified bitumen: which is better?
Neither wins everywhere. TPO is one white sheet with welded seams. It runs cooler and suits big, open roofs. Modified bitumen is two or more asphalt layers. It's tougher under foot traffic and easier to fit on small, cut-up roofs. We look at the roof's size, drainage and traffic before we recommend one.
Read more: TPO vs. Modified Bitumen: Which Flat Roof Is Better?
Can TPO go over my old roof?
Sometimes. Florida code allows a new roof over an old one only when the old roof is dry and sound and there's just one layer. We check first.
Can a TPO roof be repaired?
Yes. Punctures and small tears are patched by welding on a new piece of membrane. The older and dirtier the sheet, the more cleaning the weld takes, and a badly worn sheet won't take a patch well.
Does TPO come in colors other than white?
Yes. Tan and gray are the usual alternatives. White reflects the most heat, so it's what goes on most Florida roofs.
More Flat Roof Options
Commercial Roofing
Plazas, offices, warehouses and hotels: TPO, modified bitumen, metal and coatings.
Learn moreFlat Roofs
Modified bitumen, TPO and coated flat roofs for homes and buildings.
Learn moreCoatings & Waterproofing
Silicone coatings that can add years to a sound flat roof, plus deck and balcony waterproofing.
Learn moreWhere We Work
Palm Beach and Broward County, from Jupiter to Hollywood. Not sure we cover your street? Call and ask.
